Signal Conditioning
|
AC/DC
Voltage Amps - High Gain |
|
MODEL |
 |
Four
Channel Wideband Amplifier |
|
|
|
|
|
|
FEATURES |
|
|
|
|
| DC
to 400 kHz frequency response |
|
| Compact Rugged Enclosure |
| Extended
Gain Range |
|
| Excitation Voltage w/
Remote Sense |
|
| Digital,
programmable low pass filter |
|
| QUICK
SPEC. |
| Programmable Gain x0.04
to x10,000 |
| Frequency
Response DC- 400 kHz |
| CMMR 80dB @ 100 Hz |
| Low
Pass Filter Digital, 10 Hz to 400 kHz |
| Input Noise 10 uV (rms)
|
| Output
Noise 1 mV (rms) |
|
|
|
| |
| MODEL |
|
Differential
DC Amplifier |
|
|
|
|
|
|
FEATURES |
|
|
|
|
| Wide
Dynamic Gain Range |
|
| +/- 300 Volt Common Mode |
| Voltage
Substitution Calibration |
|
| Dual outputs |
|
| 11
position output filter |
|
| QUICK
SPEC. |
| Gain Range x0.01 to x2500 |
| Frequency
Response DC- 100 kHz |
| CMMR (G=1000) 120dB @
60 Hz |
| Input
Impedance 25 Mohm, 500 pF |
| Input Noise (100 kHz)
5 uV (rms) |
| Output
Noise 300 uV (rms) |
|
|
|
| |
| MODEL |
|
Four
Channel Instrumentation Amplifier |
|
|
|
|
|
|
FEATURES |
|
|
|
|
| Compact
Rugged Enclosure |
|
| Differential AC/DC input |
| Optimized
Gain Ranges |
|
| Programmable Output Filter |
|
| Excitation
Voltage w/ Remote Sense |
|
| QUICK
SPEC. |
| Gain - Model 5312 0.04
to x10 |
| Gain
- Model 5322 x1 to x200 |
| Gain - Model 5332 x50
to x10,000 |
| Frequency
Response DC- 100 kHz |
| CMMR 80dB @ 100 Hz |
| Noise
10 uV rms (RTI), 1 mV rms (RTO) |
|
|
|
| |
| MODEL |
|
Dual
Channel Programmable AC Amplifier |
|
|
|
|
|
|
FEATURES |
|
|
|
|
| Compact
Rugged Enclosure |
|
| Differential AC/DC input |
| Optimized
Gain Ranges |
|
| Excitation Voltage w/
Remote Sense |
|
| Digital,
programmable low pass filter |
|
| QUICK
SPEC. |
| Programmable Gain x1
to x50,000 |
| Frequency
Response DC- 100 kHz |
| CMMR 80dB @ 100 Hz |
| Noise
10 uV rms (RTI), 1 mV rms (RTO) |
| Operating Temperature
0 degrees C |
| Power
Requirements +/-15v @ 50mA |
|
|
|
| |
| MODEL |
|
Wideband
Differential DC Amplifier |
|
|
|
|
|
|
FEATURES |
|
|
|
|
| DC
to 2 megahertz frequency response |
|
| Differential high impedance
inputs |
| Dual
outputs |
|
| Isolated integral power
supplies |
|
| 6 position
output filter |
|
| QUICK
SPEC. |
| Gain Range x1 to x1000 |
| Frequency
Response DC- 2 MHz |
| CMMR (G=1000) 120dB @
60 Hz |
| Input
Impedance 10 Mohm, 500 pF |
| Input Noise (2 MHz) 15
uV (rms) |
| Output
Noise 10 mV (rms) |
|
|
|
| |
